These are some real problems experienced by MPG3307AT and Fujitsu hard drives in general that we see in our lab. We are not affiliated in any way with hard drive manufacturers. All the information below is based solely on our experience and we do not make any claims regarding reliability of the specific model. We see mostly failed drives in our lab and therefore we don't have complete statistics.
Computer power supply failed. Upon reinstall of new power supply, computer booted up for a few minutes before the hard disk controller card failed (smoke, melted foam under controler card, etc.) and computer rebooted, displayed "Can't find operating system." Tried swapping out a controller card from different hard disk of the same model (I thought), but found out the new disk was a Fujitsu - MPG3307AT. Disk was not recognized in BIOS and computer would not boot.
St.John's, Newfoundland, Canada
Fujitsu hard drives are widely known in data recovery business for their line of MPG hard drives several years ago that had faulty Cirrus Logic chips. Fujitsu manufactured about 5 millions of these hard drives and in November 2002 after a massively reported data losses have admitted the problem. The blame was laid on the supplier of epoxy mould compound used in the manufacture of Cirrus' Himalaya 2.0 and Numbur chips. It was claimed that supplier of the epoxy, a Cirrus Logic sub-contractor - made the first of several changes to its product, and it was this that ultimately caused the chips to fail by short-circuiting thus making the drive faulty and data inaccessible. After several months of use hard drives usually stop to spin up, behave erratically, start clicking etc. Nowadays these otherwise nearly ideal devices are mostly extinct but still sometimes we get them into our data recovery lab and in 100% of the cases we get all data back thanks to Fujitsu perfect mechanics.
Unfortunately this story shook Fujitsu reputation badly and they never manufactured 3.5" IDE drives anymore. Today only drives for laptops and those with SCSI interface can be seen. They are quite rare guests in our lab, thanks again to Fujitsu next to ideal mechanics and firmware implementation.
There had been a power outage overnight and I got "Operating system not found" on my computer in the morning. I bought an "IDE to USB" cradle but it would not read or spinup or be seen under the drivers section or as a disk. I assumed that the controller card was bad so I bought and identical disk (Fujitsu(model MPG3307AT)) and moved the new PCB over and it spins up and is seen by the BIOS as a USB mass storage and comes up as a disk. I hear it spin and it sounds like the reader does the normal click like ready to read so I'm assuming that the firmware on the negative cyclinders is corrupt or something.
Denver, Colorado, USA
Among the typical mechanical problems 2.5" laptop Fujitsu come into our lab are
bad heads with clicking, knocking or sweeping symptoms , and
heads being stuck to the platters so the drive can't spin up at all.
In both cases these drives need to be opened in class 100 clean room environment in order to retrieve data. Do not attempt to open the hard drive at home - you could scratch the surface and make all your data unrecoverable.
Bad sectors is another common problem for all manufactured hard drives and laptop Fujitsu drives in particular. After some period of time magnetic media the platters are covered with starts to degrade and magnetic domains can't turn in the desired direction by writing element of the head. This is how bad sectors appear. When the drive starts reading data from such unreadable bad sector it could start freezing, scratching and sometimes even clicking . This leads to further damage to the surface, heads and causes more data loss. As soon as you start experiencing such symptoms while reading important files stop the drive immediately and send it to our data recovery lab. Any further attempts would just add up to the problems. In our lab we use special imaging hardware tools that are capable of reading raw sector data ignoring checksum check. That's usually the only way to retrieve as much data as possible from such LBAs.
If you experience any of the symptoms described above with your Fujitsu MPG3307AT please feel free to contact us to get upfront quote on data recovery from your failed drive.
If you hear your Fujitsu hard drive making some other unusual noises visit our Hard Drive Sounds page for more examples.
We have seen a number of websites lately cloning information from our pages.
Stay away from those companies. They can steal information but they can't steal knowledge and experience.
Ottawa | Hull | Gatineau | Montreal | Toronto | Quebec | Vancouver | Calgary | Edmonton | Winnipeg | Hamilton
London | Kitchener | Halifax | Victoria | Windsor | Oshawa | Saskatoon | Sherbrooke | Kingston | Missisauga
Nepean | Barrie | Thunder Bay | Sudbury | Kanata | North Bay | BC | St. John's | Colchester| Newfoundland | PEI
Ontario | Quebec | Alberta | Saskatchewan | Manitoba | Alberta | British Columbia | Nova Scotia | New Brunswick